Automatic Transfer Switch(ATS)

Automatic transfer switch is controlled by the ATS controller or AMF module. When the mains is normal, the switch transfers to mains side. When the mains is off, it sends fault indications and time-lapse startup signals to the generator set. After the gneerator set starts normally and generating voltage becomes steady, transfer the switch to the generating side. If the generating voltage is not stable, the switch will not transfer. After the mains restores, the time-lapse shutdown isgnals are sent by the switch.

Where to use

Automatic transfer switch is mainly used for the automatic transfer between the mains and emergency power supply.

Synchronizing System

Synchronizing system can achieve parallel operation of multiple units and set and adjust PLC program, make automatic synchronization and distribute load based on different needs of users on the electric use so that the generator set operates more scientifically, rationally and more economically.

Introduction

The synchronizing control system adopts the all-digital liquid crystal display and has remote intelligent monitoring with communication interfaces. Each unit has the automatic synchronization and automatic parallel function.

Features:

Self-provided power grid /unit /multi-unit operation

Voltage and frequency control

Automatically synchronization

Active /reactive load distribution

Start and stop program control